vehicles_intro

Which vehicles to brand?

Vehicles that are branded with the Airbus logo have either to be Airbus owned or be exclusively used for Airbus purposes.

Vehicles supplied by a subcontractor that may eventually be used within a non-Airbus context should not be branded with our logo.

Any co-branding (Supplier logo + Airbus logo) is not allowed.

Vehicles not owned by Airbus that are used for people transportation and have to be identified as operating for Airbus, should use removable panels positioned behind windscreen and if needed behind side or rear windows.

vehicles-cars_vans

What to apply ?

The branding consists of the Airbus logo only. The exclusion zone has to be respected to keep the logo free standing from any major vehicle component.

Panels for busses or shuttles consist of a white Airbus logo on a blue background.

vehicles_logo

Colours

On white or bright vehicle background colour the logo is applied in Airbus blue (Pantone 281C, C100 M85 Y5 K36, RAL 5013, White vinyl opaque 3M-100-003)

On a dark background colour it is applied in white (White vinyl opaque 3M-100-10)

Stickers must be cutout letters.
 

vehicles_bus

Positioning and sizes

The logo is to be applied to the sides and the rear of vehicles only, the front of vehicles with exception of busses and trucks is not branded.

The stickers should be positioned on a flat surface with uniform background colour.

On the sides of the vehicle prefer a positioning towards the front, on the rear a center positioning or right hand side where possible.
 

Sizes of the logo depends on the type of vehicle.

Typical logo sizes:

Small vehicles, mini van and van: 50 cm wide

Busses: 100 cm wide

Trucks: 200 cm wide

Typical panel size for subcontractor vehicles:

Bus: 80cm wide

Shuttle bus: 50 cm wide
 

vehicles_truck

Decorative feature

For permanently Airbus owned vehicles there is the possibility to apply the Airbus aircraft tail design as a distinctive decorative feature.

For colour, design specifications and customised application on specific vehicles please contact the brand management department.

vehicles_spacialfeature

Ground handling vehicles

Which vehicles to brand:

All Ground handling vehicles that are Airbus owned or exclusively used for Airbus purposes. Any co-branding (Supplier logo + Airbus logo) is not allowed.

What to apply:

The branding consists of the Airbus logo. In addition the wording “Ground Support” and an identification number can be applied but must not be positioned beside the logo or as a lock-up.

Colours:

All elements are flat colour. On white or bright background the elements are in Airbus blue (Pantone 281C, C100 M85 Y5 K36, RAL 5013), on a dark background they are in white. Stickers should be cutout letters.

Positioning:

The stickers should be positioned on a flat surface with uniform background colour 
 

vehicles_groundsupport

Fire truck

What to apply:

The branding consists of the Airbus logo. In addition, the wording “Fire brigade” and further designations that have to be visible on the fire truck, can be applied.

Furthermore, product silhouettes can be freely selected that best represent the respective site.

Logo colours:

On white or bright background the logo is in Airbus blue (Pantone 281C, C100 M85 Y5 K36, RAL 5013), on a dark background it is white. Stickers should be cutout letters.
 

vehicles_firetruck